Solar Flood Lights for Outdoor with Motion Sensor

When you receive the solar motion sensor lights, please pay attention: First, press the "POWER" button to turn on the light, cover the solar panel, and press the "MODE" button to set the desired lighting mode. The solar lights have 4 lighting modes:

1. High brightness when the sensors detect motion and low brightness when there is no motion.
2. High brightness when sensors detect motion and turn off when there is no motion.
3. Motion sensors are disabled. Constant medium brightness, off at the end of the timing.
4. Motion sensors are disabled. Constant medium brightness, the light dims after time has elapsed.

Through the remote control, you can choose different sensing delay lighting times of solar lamps to meet different needs: 20 seconds (short time passing), 30 seconds (general setting), or 40 seconds (workplace/long-distance activities). The longer the delay time, the more power is consumed. It is recommended to choose the 30-second delay time to ensure continuous lighting on rainy days.

In the "No motion sensor mode," the solar outdoor lights work from dusk to dawn when the sensor function is turned off. The solar lamp has three levels of adjustable brightness: 100%, 80%, and 60% for all modes. It is recommended to choose 100% in the sunny season and 80%/60% in winter to ensure a longer lighting time. The chosen mode will be automatically saved, and the solar lamp works according to that.

The middle lamp head can be adjusted vertically, up and down by 45 degrees, and the side lamp heads can be adjusted horizontally from left to right, up to 90 degrees. The solar panel can be adjusted vertically up and down by 60 degrees. The optimum tilt angle is usually 20 degrees to make the most efficient use of available sunlight and to allow the rainwater to remove any dust buildup efficiently.

The intelamp solar security light system uses a new solar energy lithium iron phosphate battery with a high safety rating and more than 5 years of service life. The 6000mAh battery capacity is 3 times higher than other leading solar security lights on the market, enabling the solar lights to shine brighter for longer. The intelligent technology stores more power during sunshine hours, allowing the intelamp solar outdoor lights to still operate well on cloudy and rainy days.

The intelamp solar sensors motion detector outside has two holes on the housing for attachment, along with 2 screws, dowels, and two cable ties, providing two installation methods to meet your different needs. The intelamp security light system can illuminate an area in your backyard or garden of up to 50*50 square feet, providing all-night security and peace of mind.

Impressive high lumen and a long-distance sensor coverage of over 100ft enable unparalleled coverage of large areas, making Intelamp your first choice for keeping the public, you, and your family safe. Install the lights near the entrance to your backyard to make sure they come on when you enter, or use them to light up your garage door, the way home, and provide security throughout the night.

product information: